Instructions for preparing files for printing

1. All raster elements of graphic preparation should be about:

  • 30 dpi for XXL formats over 12 m2 (jumbo display boards, mega boards...)
  • 60 to 100 dpi for formats A0, A1, B0, B1, B2 (placards, posters, stands, roll ups, banners...)
  • 100 to 150 dpi for format A3 (smaller placards, pictures...)
  • 200 to 300 dpi for formats A4, A5 (catalogues, prospects, visit cards...)

2. Logotypes, texts, pictograms, lines etc. are recommended to be in vector format.

3. If a preparation contains text, all the text should be transferred into CURVES or PC used font should be forwarded.

4. Recommended file formats for forwarding are: .pdf, .ai, .eps, .cdr, or if the file is only in raster format: .tif, .jpg or .psd, all in rate 1:1, 1:10 or some other proportional rate depending on the size of graphics.

5. Please attach the preview of a lower resolution (.jpg) to the file with graphic preparation.

6. In case of printout which uses white colour, print & cut printout or 3D lenticular, due to preparation particularity, contact us on the phone numbers below.

7. Since different materials have different absorbing characteristics, it is suggested to use a significant percentage of different colours with the black one if printing uses 100% of black colour.
A good starting point would be C:30% M:20% Y:20% C:100%

Feel free to contact us for further information.

Instructions for sending files to printing

Send your files up to 10MB to the e-mail 'pozor@pozor.hr', and those larger than 10 MB send to e.g.: Jumbo mail or similar services)

Notes for users of Corel Draw-a:
TURN OFF all effects (lens, mesh fill, etc...), i.e. raster them.

Preparation in Word, Excel, Power Point etc. "office" programmes is not good enough and is not recommended for quality printing.

Graphic preparation:
+385 (0)91 60 76 967 (Sasha - Communication in English)
+385 (0)91 25 76 967 (Nenad)

Image Image Image Image

Prijava na korisnički račun